Industrial Painting Services for Protective Coating Systems

Controlled Application of Primer, Intermediate, and Finish Coats

Controlled primer, intermediate, and finish coat systems
Verified DFT and coating uniformity
Compliance with customer and industry standards
Enhanced corrosion and weather resistance
Documented inspection and quality assurance

Aditya Metallizing Services delivers comprehensive industrial painting services designed to protect steel and fabricated components from corrosion, environmental exposure, and mechanical wear. Painting operations are carried out following stringent surface preparation and quality control procedures to ensure long-term coating performance.

Painting is performed after achieving SA 2½ surface preparation through abrasive blasting. Primer application is completed within four hours of blasting to prevent surface oxidation. Approved primer systems are applied using spray or airless equipment to ensure uniform coverage and specified dry film thickness (DFT)

Intermediate and finish coats are applied after the primer has achieved the required curing state. Each coat is applied continuously and uniformly, following manufacturer recommendations for inter-coat intervals, environmental conditions, and application techniques. The choice of paint systems is based on customer technical specifications, service environment, and performance requirements.

Delivering After Painting

Painted Cone

Aditya Metallizing Services employs controlled spray painting booths to minimize contamination and environmental variation during application. Parameters such as ambient temperature, relative humidity, and dew point are monitored to prevent coating defects such as blistering, pinholing, or poor adhesion.

Dry Film Thickness measurements are conducted after each coat using calibrated digital thickness gauges. Where required, additional coats are applied to achieve the specified total DFT without compromising coating integrity. All coating materials used are sourced directly from approved manufacturers and are supported by test certificates and batch traceability.

Inspection and testing are carried out at every critical stage, including surface preparation, primer application, intermediate coating, and final finish. Third-party inspection is facilitated when specified by the customer. Detailed documentation is maintained, including DFT readings, inspection reports, and calibration records.

Industrial painting services are suitable for steel structures, tanks, pipelines, exhaust systems, machinery frames, and infrastructure components across multiple industrial sectors.